Using Sequence with Broker and Trigger

We are going to create the following logical configuration. We create a PingSource, feeding events into the Broker, then we create a Filter that wires those events into a Sequence consisting of 3 steps. Then we take the end of the Sequence and feed newly minted events back into the Broker and create another Trigger which will then display those events.

Prerequisites

For this example, we'll assume you have set up an InMemoryChannel as well as Knative Serving (for our functions). The examples use default namespace, again, if your broker lives in another Namespace, you will need to modify the examples to reflect this.

If you want to use different type of Channel, you will have to modify the Sequence.Spec.ChannelTemplate to create the appropriate Channel resources.

Logical Configuration

The functions used in these examples live in https://github.com/knative/eventing-contrib/blob/master/cmd/appender/main.go.

Setup

Creating the Broker

The easiest way to create a Broker is to annotate your namespace:

kubectl label namespace default knative-eventing-injection=enabled

Create the Knative Services

Change default below to create the steps in the Namespace where you have configured your Broker

apiVersion: serving.knative.dev/v1
kind: Service
metadata:
  name: first
spec:
  template:
    spec:
      containers:
        - image: gcr.io/knative-releases/knative.dev/eventing-contrib/cmd/appender
          env:
            - name: MESSAGE
              value: " - Handled by 0"

---
apiVersion: serving.knative.dev/v1
kind: Service
metadata:
  name: second
spec:
  template:
    spec:
      containers:
        - image: gcr.io/knative-releases/knative.dev/eventing-contrib/cmd/appender
          env:
            - name: MESSAGE
              value: " - Handled by 1"
---
apiVersion: serving.knative.dev/v1
kind: Service
metadata:
  name: third
spec:
  template:
    spec:
      containers:
        - image: gcr.io/knative-releases/knative.dev/eventing-contrib/cmd/appender
          env:
            - name: MESSAGE
              value: " - Handled by 2"

---


kubectl -n default create -f ./steps.yaml

Create the Sequence

The sequence.yaml file contains the specifications for creating the Sequence. If you are using a different type of Channel, you need to change the spec.channelTemplate to point to your desired Channel.

Also, change the spec.reply.name to point to your Broker

apiVersion: flows.knative.dev/v1beta1
kind: Sequence
metadata:
  name: sequence
spec:
  channelTemplate:
    apiVersion: messaging.knative.dev/v1beta1
    kind: InMemoryChannel
  steps:
    - ref:
        apiVersion: serving.knative.dev/v1
        kind: Service
        name: first
    - ref:
        apiVersion: serving.knative.dev/v1
        kind: Service
        name: second
    - ref:
        apiVersion: serving.knative.dev/v1
        kind: Service
        name: third
  reply:
    ref:
      kind: Broker
      apiVersion: eventing.knative.dev/v1beta1
      name: default

Change default below to create the Sequence in the Namespace where you have configured your Broker.

kubectl -n default create -f ./sequence.yaml

Create the PingSource targeting the Broker

This will create a PingSource which will send a CloudEvent with {“message”: “Hello world!"} as the data payload every 2 minutes.

apiVersion: sources.knative.dev/v1alpha2
kind: PingSource
metadata:
  name: ping-source
spec:
  schedule: "*/2 * * * *"
  jsonData: '{"message": "Hello world!"}'
  sink:
    ref:
      apiVersion: eventing.knative.dev/v1beta1
      kind: Broker
      name: default

Here, if you are using different type of Channel, you need to change the spec.channelTemplate to point to your desired Channel. Also, change the spec.reply.name to point to your Broker

Change default below to create the Sequence in the Namespace where you have configured your Broker.

kubectl -n default create -f ./ping-source.yaml

Create the Trigger targeting the Sequence

apiVersion: eventing.knative.dev/v1beta1
kind: Trigger
metadata:
  name: sequence-trigger
spec:
  filter:
    attributes:
      type: dev.knative.sources.ping
  subscriber:
    ref:
      apiVersion: flows.knative.dev/v1beta1
      kind: Sequence
      name: sequence

Change default below to create the Sequence in the Namespace where you have configured your Broker.

kubectl -n default create -f ./trigger.yaml

Create the Service and Trigger displaying the events created by Sequence

apiVersion: serving.knative.dev/v1
kind: Service
metadata:
  name: sequence-display
spec:
  template:
    spec:
      containers:
        - image: gcr.io/knative-releases/knative.dev/eventing-contrib/cmd/appender
---
apiVersion: eventing.knative.dev/v1alpha1
kind: Trigger
metadata:
  name: display-trigger
spec:
  filter:
    attributes:
      type: samples.http.mod3
  subscriber:
    ref:
      apiVersion: serving.knative.dev/v1
      kind: Service
      name: sequence-display
---

Change default below to create the Service and Trigger in the Namespace where you have configured your Broker.

kubectl -n default create -f ./display-trigger.yaml

Inspecting the results

You can now see the final output by inspecting the logs of the event-display pods.

kubectl -n default get pods

Then look at the logs for the event-display pod:

kubectl -n default logs -l serving.knative.dev/service=sequence-display -c user-container --tail=-1
☁️  cloudevents.Event
Validation: valid
Context Attributes,
  specversion: 1.0
  type: samples.http.mod3
  source: /apis/v1/namespaces/default/pingsources/ping-source
  id: 159bba01-054a-4ae7-b7be-d4e7c5f773d2
  time: 2020-03-03T14:56:00.000652027Z
  datacontenttype: application/json
Extensions,
  knativearrivaltime: 2020-03-03T14:56:00.018390608Z
  knativehistory: default-kne-trigger-kn-channel.default.svc.cluster.local; sequence-kn-sequence-0-kn-channel.default.svc.cluster.local; sequence-kn-sequence-1-kn-channel.default.svc.cluster.local; sequence-kn-sequence-2-kn-channel.default.svc.cluster.local; default-kne-trigger-kn-channel.default.svc.cluster.local
  traceparent: 00-e893412106ff417a90a5695e53ffd9cc-5829ae45a14ed462-00
Data,
  {
    "id": 0,
    "message": "Hello world! - Handled by 0 - Handled by 1 - Handled by 2"
  }

And you can see that the initial PingSource message {"Hello World!"} has been appended to it by each of the steps in the Sequence.